3.1 Topside Control Panel Components

The topside control panel includes essential components like the Light button for spa and perimeter LED lights, temperature controls, and jet activation buttons. It also features a circuit breaker for system protection and LED indicators that provide status updates. The panel’s design ensures easy access to all functions, with a clear layout for intuitive operation. Additionally, it houses the serial number label, necessary for warranty and support purposes. These components work together to offer a seamless and efficient user experience for spa operation and maintenance.

3.2 Button Functions (Light, Temperature, Jets)

The Light button activates the spa light and perimeter LED lights, enhancing ambiance. Temperature buttons adjust the set temperature, with a minimum of 80°F/26°C. Jet buttons cycle through low to high speeds. The panel ensures intuitive control, with LED indicators showing active functions. Pressing the Light button toggles illumination, while temperature adjustments are confirmed by LED feedback. Jets can be customized for comfort, and buttons provide tactile feedback for easy operation. These functions streamline spa usage, offering a user-friendly experience for relaxation and enjoyment.

3.3 LED Indicators and Their Meanings

The control panel features LED indicators that provide essential system feedback. The Power LED indicates the spa is operational, while the Temperature LED shows heating status or target temperature. The Jet LED displays active jet speeds, and the Filter LED indicates filtration cycles or cleaning needs. An Error LED alerts users to system issues, such as overheating or pump malfunctions. These indicators ensure users are informed about the spa’s status, aiding in troubleshooting and maintenance. Understanding these LEDs enhances overall spa operation and safety.

Initial Start-Up Instructions

After powering up, the control panel initializes automatically. The first filter cycle starts 6 minutes after activation, followed by a second cycle 12 hours later. Ensure all systems operate correctly before use.

4.1 Power-Up Sequence

The power-up sequence begins with turning on the circuit breaker, allowing the control panel to initialize automatically. The PR indicator will light up, signaling the start of diagnostics. After 6 minutes, the first preset filter cycle activates, followed by a second cycle 12 hours later. Ensure all systems, including jets and lights, function correctly. Let the spa complete its initial cycles before adjusting settings or using the tub. Refer to the manual for detailed guidance on monitoring the power-up process and performing initial checks.

4.2 First-Time Setup and Calibration

After powering up, press the temperature button to set your desired temperature. Use the up/down arrows to adjust. Select Standard or Economy mode by pressing “Temp” and “Light” simultaneously. Test jet and light functions to ensure proper operation. Allow the system to complete its initial calibration, which may include automatic filter cycles. Refer to the manual for specific calibration steps and mode details to optimize performance. Proper setup ensures efficient and safe operation of your Strong Spa system.

4.3 Initial Filter Cycle Activation

The initial filter cycle starts automatically 6 minutes after the spa is powered on. This ensures proper water circulation and filtration. The second cycle begins 12 hours later. Allow the system to complete these cycles uninterrupted for optimal water quality. Monitor the control panel for any notifications or error codes. If issues arise, consult the manual for troubleshooting. Proper filter activation ensures your spa operates efficiently and maintains clean, safe water conditions for use.

Operating the Spa

Press the LIGHTS button to turn on spa lights and perimeter LEDs. Adjust temperature using the TEMP button. Activate jets using designated buttons for a relaxing experience.

5.1 Standard Mode Operation

Standard Mode maintains the set temperature, ensuring consistent heat levels. Press the TEMP button to adjust settings. The control panel’s buttons manage lights, temperature, and jets. Use the LIGHTS button for spa and perimeter LED illumination. Jets can be activated by their designated buttons for a soothing experience. Standard Mode is energy-efficient and ideal for daily use. The system automatically starts filter cycles after power-up, ensuring clean water. This mode balances comfort and energy savings, providing a relaxing spa experience with minimal effort.

5.2 Economy Mode for Energy Efficiency

Economy Mode optimizes energy use by heating the spa only during off-peak times. It reduces overall energy consumption while maintaining a comfortable temperature. Activate this mode by pressing the TEMP and LIGHT buttons simultaneously. The system will heat the water during predetermined, energy-efficient periods. Economy Mode is ideal for balancing energy savings and spa enjoyment. It ensures the spa remains ready for use while minimizing operational costs. This feature is particularly beneficial for users seeking to lower their energy bills without compromising on relaxation and comfort.

5.3 Adjusting Temperature Settings

To adjust the temperature on your Strong Spa control panel, press the TEMP button to cycle through settings. Use the LIGHT button to increase or decrease the desired temperature. The system displays the current temperature, and adjustments are made in 1-degree increments. The spa temperature can be set between 80°F and 104°F (27°C to 40°C). Once adjusted, the system will maintain the selected temperature. Ensure the temperature is set according to your preference before use. This feature ensures optimal comfort and energy efficiency during operation.

5.4 Activating Jets and Lighting

To activate the jets, press the JETS button on the control panel. Use the LIGHT button to adjust jet speed in preset increments. For lighting, press the LIGHT button to toggle the spa light on or off. If equipped, perimeter LED lights will activate simultaneously. The system allows customizable settings for jet sequences and light colors. Energy-efficient modes ensure optimal performance while enhancing your spa experience. Adjust these features to create a relaxing atmosphere tailored to your preferences. Always ensure the spa is properly prepared before activating jets or lights.

Maintenance and Upkeep

Regular maintenance ensures optimal performance. Clean the control panel, check filters, and perform winterization to prevent damage and extend the spa’s lifespan. Schedule upkeep for reliability.

6.1 Regular Cleaning of the Control Panel

Regular cleaning of the control panel is essential for maintaining functionality and longevity. Use a soft cloth and mild detergent to wipe down the surface, avoiding harsh chemicals. Ensure the panel is dry to prevent moisture damage. For stubborn stains, dampen the cloth slightly but avoid soaking. Never submerge or expose the panel to excessive water. Cleaning helps maintain responsiveness and clarity of buttons and displays. For detailed cleaning instructions, refer to your Strong Spa user manual or contact customer support for guidance.

6.2 Checking and Replacing Filters

Regularly inspect and replace filters to ensure optimal spa performance. Check for visible debris, tears, or excessive wear. Replace filters every 1-2 years or as recommended. Turn off the power and let the system cool before servicing. Consult your Strong Spa manual for specific filter locations and replacement procedures. Proper maintenance prevents contamination and maintains water quality. For assistance, contact Strong Spas support or refer to the troubleshooting guide in your manual.

6.3 Winterization Procedures

Winterizing your Strong Spa is crucial to prevent damage from freezing temperatures; Drain the system thoroughly and disconnect electrical components. Insulate exposed pipes and the control panel to protect against frost. Refer to your manual for specific steps tailored to your spa model. Ensure all water is removed from pumps and heaters to avoid cracking. Consult a professional if unsure. Proper winterization ensures your spa remains in good condition for future use. Always follow safety guidelines and manufacturer recommendations during this process.

Troubleshooting Common Issues

Identify and resolve issues with the control panel by checking for loose connections, ensuring proper power supply, and referring to the user manual for specific error codes.

7.1 Error Codes and Their Solutions

Your Strong Spa control panel displays error codes to indicate specific issues. Common codes include “E1” for temperature sensor malfunctions and “E2” for heater errors. Refer to the manual for a full list of codes and their meanings. To resolve issues, ensure all connections are secure, reset the panel if necessary, and verify proper power supply. For persistent problems, contact Strong Spas support or consult the troubleshooting guide. Always follow safety guidelines when addressing electrical or system-related errors to avoid further complications.

7.2 Resetting the Control Panel

To reset the Strong Spa control panel, press and hold the “Light” and “Temperature” buttons simultaneously for 5 seconds. This action will restart the system, clearing temporary glitches. The panel will power off briefly before restarting. After resetting, test the functionality to ensure proper operation. Note that resetting does not affect pre-set temperature or jet settings. If issues persist, refer to the troubleshooting guide or contact Strong Spas customer support. Always ensure the spa is powered down before performing any electrical maintenance.

7.3 Identifying and Resolving Electrical Issues

If the control panel malfunctions, check the circuit breaker or fuse box to ensure power is supplied. Verify all electrical connections are secure and free from corrosion. If issues persist, reset the circuit breaker or replace the fuse. Avoid DIY electrical repairs, as this may void the warranty. For complex problems, consult a qualified electrician or contact Strong Spas customer support. Always disconnect power before performing any electrical inspections or repairs to ensure safety and prevent further damage to the control panel or spa system.

Advanced Features and Settings

Explore advanced features like scheduling filter cycles, customizing system settings, and adjusting heater or pump configurations for personalized spa experiences and optimal energy efficiency.

8.1 Customizing System Settings

Customizing system settings on your Strong Spa control panel allows you to tailor your spa experience to your preferences. Access the menu by pressing the appropriate buttons on the topside control panel, then navigate to the settings section. Adjust temperature ranges, jet activation sequences, and lighting options to create a personalized experience. Save your preferences to ensure consistent operation. For detailed guidance, refer to the manual or contact customer support for assistance in optimizing your spa’s performance and functionality.

8.2 Scheduling Filter Cycles

Scheduling filter cycles on your Strong Spa ensures optimal water quality and system efficiency. Press and hold the filter button on the control panel to access the scheduling menu. Use the up/down arrows to set the desired start time and cycle duration. The default setting activates the filter 12 hours after power-up, but you can customize it to suit your usage patterns. Once set, the system will automatically run the filter during the programmed times. This feature helps maintain clean water and reduces manual intervention, ensuring your spa remains ready for use.

8.3 Adjusting Heater and Pump Settings

Adjusting the heater and pump settings on your Strong Spa control panel allows for personalized comfort and energy efficiency. Press the temperature button to access the heater settings. Use the up/down arrows to set your desired temperature (range: 80°F to 104°F). For pump settings, press the light button to cycle through options. Select low, high, or economy mode to balance energy use and performance. Economy mode reduces heating and pump activity, saving energy while maintaining comfort. These adjustments ensure optimal spa operation tailored to your preferences and usage patterns.

Safety Guidelines

Always read the manual before use. Follow electrical safety precautions and avoid unauthorized modifications. Keep children away from controls and ensure proper supervision during operation for optimal safety.

9.1 General Safety Precautions

Before installing or operating your Strong Spa, read all instructions carefully. Ensure proper electrical connections and avoid unauthorized modifications. Keep children away from controls and supervise usage. Maintain a safe distance from electrical components when wet. Never operate the spa if damaged or malfunctioning. Always follow local electrical safety codes and guidelines. Regularly inspect the system for wear or damage. Consult a qualified professional for any repairs or installations to ensure compliance with safety standards.

9.2 Emergency Shutdown Procedures

In case of an emergency, immediately turn off the power to the spa at the circuit breaker. Press and hold the power button on the control panel until all functions cease. If the system malfunctions, reset the control panel by turning the power off and on again. For critical issues, disconnect the power supply completely. Always consult the user manual for specific shutdown instructions. If unsure, contact a qualified technician or Strong Spa customer support for assistance.

9.3 Child Safety Features

The Strong Spa Control Panel includes child safety features to prevent accidental activation. Enable the child safety lock by pressing and holding the “Light” and “Temperature” buttons simultaneously for 3 seconds. This will disable all functions except the power button. Additionally, consider using a keypad lock if available. Always supervise children near the spa and teach them to respect its operation. Regularly check the lock to ensure it is engaged. These features help create a safer environment for families while maintaining easy access for authorized users.

Technical Specifications

The Strong Spa Control Panel operates at 120/240V, 50/60Hz, with a maximum power output of 5kW. Built with durable ABS plastic, it ensures long-lasting performance and reliability. Compatibility with various spa models guarantees seamless integration, while the energy-efficient design minimizes power consumption. Refer to the manual for detailed electrical and compatibility specifications.

10.1 Control Panel Compatibility

The Strong Spa Control Panel is designed to be compatible with a wide range of spa models, including the Acrylic Spa and Vienna series. It supports both 120V and 240V electrical systems, ensuring flexibility for different installations. The control panel is also compatible with optional features like perimeter LED lights and advanced filtration systems. Its universal design allows seamless integration with various spa configurations, making it a versatile choice for homeowners. Always refer to the manual to confirm compatibility with your specific spa model and electrical setup.

10.2 Electrical and Power Requirements

The Strong Spa Control Panel requires a dedicated 240V, 40-amp electrical connection for optimal performance. Ensure the circuit breaker is rated appropriately to handle the spa’s power demand. A licensed electrician should wire the control unit to the household equipotential terminal using a minimum 1.5mm solid copper wire. The system supports both 120V and 240V configurations, depending on the spa model. Always refer to the manual for specific voltage and power requirements to ensure compatibility and safety. Proper electrical setup is crucial for system functionality and warranty validity.

10.4 Warranty and Support Information

Your Strong Spa Control Panel is backed by a comprehensive warranty, covering parts and labor for a specified period. For any issues, contact our dedicated customer support team at 1-800-787-6649 or visit strongspasupport.com. Ensure your spa serial number, located on the control pack box panel, is ready when seeking assistance. This information is crucial for efficient support and warranty claims, ensuring your spa operates smoothly for years to come.

Additional Resources

Access downloadable manuals, customer support at 1-800-787-6649, and replacement parts information to enhance your Strong Spa experience and knowledge.

11.1 Downloading the User Manual

To download the Strong Spa user manual, visit the official Strong Spas website or authorized dealer sites. Manuals are available in PDF format for easy access and printing. Ensure you select the correct model, such as the Acrylic Spa or Vienna series, to match your specific control panel. The manual covers installation, operation, and troubleshooting, providing comprehensive guidance for optimal spa performance. For convenience, save the PDF to your device for quick reference anytime. Visit Strong Spas to download your manual today.

11.2 Contacting Customer Support

For assistance with your Strong Spa control panel, contact customer support at 1-800-787-6649. Have your spa’s serial number ready for efficient service. Visit Strong Spas Support for troubleshooting, maintenance guidance, or technical help. Their team is available to address any questions or concerns, ensuring your spa operates smoothly and safely. Reach out today for expert support tailored to your needs.

11.3 Finding Replacement Parts

To find replacement parts for your Strong Spa control panel, visit the official Strong Spas Support website. Navigate to the “Parts” section for a comprehensive list of available components. Contact customer support at 1-800-787-6649 for assistance with specific parts. Ensure you have your spa’s serial number ready for quick identification. Replacement parts are designed to maintain optimal performance and safety, ensuring your spa continues to function efficiently. Visit the site today to explore and order the parts you need.